Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Hashimoto, Shunsuke*; Nakajima, Kenji; Kikuchi, Tatsuya*; Kamazawa, Kazuya*; Shibata, Kaoru; Yamada, Takeshi*
Journal of Molecular Liquids, 342, p.117580_1 - 117580_8, 2021/11
Times Cited Count:3 Percentile:27(Chemistry, Physical)Quasi-elastic neutron scattering (QENS) and pulsed-field-gradient nuclear magnetic resonance (PFGNMR) analyses of a nanofluid composed of silicon dioxide (SiO) nanoparticles and a base fluid of ethylene glycol aqueous solution were performed. The aim was to elucidate the mechanism increase in the thermal conductivity of the nanofluid above its theoretical value. The obtained experimental results indicate that SiO particles may decrease the self-diffusion coefficient of the liquid molecules in the ethylene glycol aqueous solution because of their highly restricted motion around these nanoparticles. At a constant temperature, the thermal conductivity increases as the self-diffusion coefficient of the liquid molecules decreases in the SiO nanofluids.
Ichikawa, Kenta*; Kanda, Hironori; Yoshioka, Naoki*; Ara, Kuniaki; Saito, Junichi; Nagai, Keiichi
Proceedings of 26th International Conference on Nuclear Engineering (ICONE-26) (Internet), 6 Pages, 2018/07
Studies on the suppression of the reactivity of sodium itself have been performed on the basis of the concept of suspended nanoparticles in liquid sodium (sodium nanofluid). According to the experimental and theoretical results of studies for sodium nanofluid, velocity and heat of sodium nanofluid-water reaction are lower than those of the pure sodium-water reaction. The analytical model for the peak temperature of a sodium nanofluid-water reaction jet has been developed in consideration of these suppression effects by the authors. In this paper, the prediction method for mitigation effects for a damage of adjacent tubes in a steam generator tube rupture (SGTR) accidents is arranged by applying this analytical model for the peak temperature of the reaction jet. On the assumption that the sodium nanofluid is used for the secondary coolant of sodium-cooled fast reactor (SFR), mitigation effects under the design-base accident (DBA) condition and the design-extension condition (DEC) of SGTR are estimated by using this method. As a result, there is a possibility to reduce the number of damaged tubes and to suppress the pressure generated by SGTR accidents by using sodium nanofluid in the secondary coolant.
Itami, Toshio*; Saito, Junichi; Ara, Kuniaki
Metals, 5(3), p.1212 - 1240, 2015/09
Times Cited Count:2 Percentile:4.14(Materials Science, Multidisciplinary)A new kind of suspension liquid was developed by dispersing Ti nanoparticles (10 nm) in liquid Na, which was then determined by TEM (transmission electron microscopy) analysis. The volume fraction was estimated to be 0.0088 from the analyzed Ti concentration (2 at.%) and the densities of Ti and Na. This suspension liquid, Liquid Sodium containing nanoparticles of titanium (LSnanop), shows, despite only a small addition of Ti nanoparticles, many striking features, namely a negative deviation of 3.9% from the ideal solution for the atomic volume, an increase of 17% in surface tension, a decrease of 11% for the reaction heat to water, and the suppression of chemical reactivity to water and oxygen. The decrease in reaction heat to water seems to be derived from the existence of excess cohesive energy of LSnanop. The excess cohesive energy was discussed based on simple theoretical analyses, with particular emphasis on the screening effect. The suppression of reactivity is discussed with the relation to the decrease of heat of reaction to water or the excess cohesive energy, surface tension, the action as a plug of Ti oxide, negative adsorption on the surface of LSnanop, and percolation.